Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Soar 3100: (1 year) CAL VER /5500
DATE:                  10-Sep-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.5 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       17
NUMBER OF LINES:       90
CONFIGURATION:         Fluke 5500A
=============================================================================
#
# Compatibility:
#   5500/CAL 4.0 or MET/CAL 4.0 or later.
#
# Subprocedures:
#   None
#
# Required Files:
#   3100.bmp
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5500A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  DISP         {Procedure not formally tested with UUT.}
  1.001  DISP         {See procedure README file.}
  1.002  ASK-                        P                            F        V
  1.003  ASK+           K                              X
  1.004  HEAD         PRELIMINARY INSTRUCTIONS
  1.005  DISP         Warm-up time: NONE
  1.005  DISP         Temperature: 0 - 40 degC
  1.005  DISP         Humidity: <70%
  1.006  DISP         [32]                WARNING
  1.006  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.006  DISP         of this calibration.  DEATH ON CONTACT may result if
  1.006  DISP         personnel fail to observe safety precautions.
  1.007  PIC          3100
  1.008  DISP         Set the POWER switch to ON.
  1.009  HEAD         {DC VOLTAGE}
  1.010  HEAD         DC VOLTAGE: {200mV Range}
  1.011  5500   200   100.0mV        0.5% 0.3U                             2W
  2.001  HEAD         DC VOLTAGE: {2000mV Range}
  2.002  5500   2000  1000mV         0.7% 2U                               2W
  3.001  HEAD         DC VOLTAGE: {20V Range}
  3.002  5500   20    10.00V         0.7% 0.02U                            2W
  4.001  HEAD         DC VOLTAGE: {200V Range}
  4.002  5500   200   100.0V         0.7% 0.2U                             2W
  5.001  HEAD         DC VOLTAGE: {500V Range}
  5.002  5500   500   500V           0.7% 2U                               2W
  6.001  HEAD         {AC VOLTAGE}
  6.002  HEAD         AC VOLTAGE: {2000mV Range}
  6.003  5500   2000  1000mV         1% 5U         400H           SI       2W
  7.001  HEAD         AC VOLTAGE: {20V Range}
  7.002  5500   20    10.00V         1% 0.05U      400H           SI       2W
  8.001  HEAD         AC VOLTAGE: {200V Range}
  8.002  5500   200   100.0V         1% 0.5U       60H            SI       2W
  9.001  HEAD         AC VOLTAGE: {500V Range}
  9.002  5500   500   500V           1% 5U         60H            SI       2W
 10.001  HEAD         {RESISTANCE}
 10.002  HEAD         RESISTANCE: {20 MOhm Range}
 10.003  5500   20    10.00MZ        2% 0.03U                              2W
 11.001  HEAD         RESISTANCE: {2000 kOhm Range}
 11.002  5500   2000  1000kZ         1.2% 2U                               2W
 12.001  HEAD         RESISTANCE: {200 kOhm Range}
 12.002  DISP         Connect the 5500A to the UUT as follows:
 12.002  DISP         [32] 5500A AUX HI to UUT Probe Tip
 12.002  DISP         [32] 5500A AUX LO to UUT COM
 12.002  DISP         [32] 5500A NORMAL HI to UUT Probe Tip
 12.002  DISP         [32] 5500A NORMAL LO to UUT COM
 12.002  DISP         Connect the SENSE leads DIRECTLY to the UUT.  Connect
 12.002  DISP         the NORMAL leads to the SENSE leads AT the UUT.
 12.003  DISP         Set the FUNCTION switch to OHMS.
 12.004  5500   200   100.0kZ        0.7% 0.2U                             CW
 13.001  HEAD         RESISTANCE: {20 kOhm Range}
 13.002  5500   20    10.00kZ        0.7% 0.02U                            CW
 14.001  HEAD         RESISTANCE: {2000 Ohm Range}
 14.002  5500   2000  1000Z          0.7% 2U                               CW
 15.001  HEAD         RESISTANCE: {200 Ohm Range}
 15.002  5500   200   100.0Z         0.7% 0.4U                             CW
 16.001  HEAD         {CONTINUITY}
 16.002  DISP         Press the OHMS/TONE selector located on the top
 16.002  DISP         of the unit, and check the display for "*))".
 16.003  5500         100Z                                              S  CW
 16.004  EVAL   Is {there an AUDIBLE TONE present}?
 17.001  END